Discharge Rubber Hose

  • Home
  • /
  • Discharge Rubber Hose Manufacturer & Supplier in Meerut

Oil Suction & Discharge Rubber Hose

Discharge Rubber Hose As Per IS: 8189 (Rough & Smooth Bore)
Working Pressure: 7 kgf/ cm2
Minimum Bursting Pressure: 28 kgf/ cm2

Working Pressure: 10 kgf/ cm2
Minimum Bursting Pressure: 40 kgf/ cm2

Working Pressure: 15 kgf/ cm2
Minimum Bursting Pressure: 60 kgf/ cm2
Nominal Bore ID (mm):
63.0 mm to 400.0 mm

Construction:
Tube: Uniform lining of suitable rubber compound highly resistant to all grades of Petroleum and blended Products having aromatic hydrocarbon content not more than 25%.

Reinforcement: Plies of woven textile which is well rubberized from both sides with a suitable rubber compound and a helical GS wire embedded between the fabric plies in case of smooth bore. In case of rough bore hose first is internal and second is embedded.

Electrical Bonding: Low resistant electrical bonding wire is in incorporated between the reinforcement plies to provide electrical continuity along the whole length of the hose.

Cover: Plain or Corrugated outer cover having cloth marked finish with a suitable rubber compound resistant to abrasion, weather and Oil.

End Connection: The hose is built in nipples with or without flanges as per customer requirement.

Application:
This hose is used for Dock and Offshore operations of Petroleum Products containing not more than 25% aromatic hydrocarbon.

Service Temperature Range:-
-40o F to +158o F

whatsapp