Rubber Hose for Cement Grounting
Home >> Industrial Rubber Hose>>Rubber Hose for Cement Grounting:
 
As Per IS: 5137
Working Pressure: 10 kgf/ cm2
Minimum Bursting Pressure: 40 kgf/ cm2
Nominal Bore ID (mm):
25.0 mm to 75.0 mm

Construction:
Tube:Highly abrasion resistant soft natural rubber compound.

Reinforcement: Woven or Braided or Spirally wound textile of high strength synthetic fibres.

Electrical Bonding:Low resistant electrical bonding wire incorporated between the reinforcement plies to provide electrical continuity along the whole length of the hose.

Cover: Cloth marked finish cover, resistant to weather and abrasion.

Application:
This hose is used for Cement Grouting at irrigations projects, construction sites & bridges etc.

Service Temperature Range:-
-40o F to +158o F
   
 
General Purpose Rubber Water Hose
Rubber Air Hose
Rubber Air Hose Pneumatic Purpose
Rubber Air Hose Rock Drilling
Rubber Hose for Agricultural Spray
Rubber Hose for Steam
Rubber Hose for Sand Blasting
Rubber Hose for Cement Grounting
Rubber Hose for Chemicals
Rubber Hose for Brewery (Food Grade)
Electrically Bonded Road & Rail Tanker Rubber Hose
Water Suction & Discharge Rubber Hose
Oil Suction & Discharge Rubber Hose
Mud Slurry Hose
Radiator Hose
Bulk Hose
Dredger Hose
General Purpose Car Washing Hose
Rubber Hose For Welding
Rubber Hose for Fuel Dispensing
Rubber Hose for HOT Water
   
Fire -Fighting Accessories
   
 
 
   
Home | About Us | Industrial Rubber Hoses | Fire Fighting Accessories | Rubber Sheets/Mats | Technical Approvals | Group Companies
Dealer Network | Career | Contact Us | Sitemap