Rubber Hose for Sand Blasting
Home >> Industrial Rubber Hose>>Rubber Hose for Sand Blasting
 
IS: 5894 Type-1
CM/L No:- 8523880
Working Pressure: 7 kgf/ cm2
Minimum Bursting Pressure: 35 kgf/ cm2
IS: 5894 Type-2
CM/L No:- 8523880
Working Pressure: 10 kgf/ cm2
Minimum Bursting Pressure: 50 kgf/ cm2
Nominal Bore ID (mm):
20.0 mm to 100.0 mm

Construction:
Tube:Extra thick seamless tube of soft natural rubber compound of high tensile strength, excellent abrasion resistant and free from any mineral filler.

Reinforcement: Plies of woven textile of high strength natural or synthetic fibre

Electrical Bonding: Low resistant electrical bonding wire incorporated between the reinforcement plies to provide electrical continuity along the whole length of the hose. .

Cover: Natural or Synthetic Rubber, Cloth marked finish.

Application:
This hose is used for Sand/Shot blasting applications for conveying sand and other abrasive materials at high velocity in heavy engineering industries, ordnance factories etc.

Service Temperature Range:-
-40o F to +158o F
Note:-
20.0 mm to 50.0 mm sizes are ISI Marked.
   
 
General Purpose Rubber Water Hose
Rubber Air Hose
Rubber Air Hose Pneumatic Purpose
Rubber Air Hose Rock Drilling
Rubber Hose for Agricultural Spray
Rubber Hose for Steam
Rubber Hose for Sand Blasting
Rubber Hose for Cement Grounting
Rubber Hose for Chemicals
Rubber Hose for Brewery (Food Grade)
Electrically Bonded Road & Rail Tanker Rubber Hose
Water Suction & Discharge Rubber Hose
Oil Suction & Discharge Rubber Hose
Mud Slurry Hose
Radiator Hose
Bulk Hose
Dredger Hose
General Purpose Car Washing Hose
Rubber Hose For Welding
Rubber Hose for Fuel Dispensing
Rubber Hose for HOT Water
   
Fire -Fighting Accessories
   
 
 
   
Home | About Us | Industrial Rubber Hoses | Fire Fighting Accessories | Rubber Sheets/Mats | Technical Approvals | Group Companies
Dealer Network | Career | Contact Us | Sitemap